Outdoor Shows
Aviation, weather, crowds and neighbours: what changes when the show moves outside.
Outdoor shows are different. There is no ceiling, the public can often reach more of the site, the weather moves things, and beams can travel a long way. Your planning needs to start earlier and cover more. Start with the authorities, because they can take the longest.
Aviation comes first. The Standard (AS/NZS IEC 60825.3:2022) says to notify aviation authorities about any projection into navigable airspace. [cl. 7.2.12] In Australia the regulator is CASA. Its advisory circular AC 139.E-03, from December 2024, covers laser emissions that may endanger aircraft, including hazard evaluation and protected flight zones. Read the current version, then contact CASA as soon as you know the date and the site. Ask what they need from you and how long it takes. In Western Australia you also notify Airservices Australia. In New Zealand, contact the Civil Aviation Authority early. Pointing a laser at an aircraft is a serious offence, so check the current law.
Put aircraft in your risk assessment, even for effects that point away from the crowd. Allow for faults, such as a projector that shifts on its mount. The aviation authority may ask for spotters. A spotter needs a clear view, no other job, and a way to end the emission at once or warn the operator. [cl. 7.4.1]
Water and neighbours matter too. The Standard says to tell maritime authorities about beams over navigable waterways and harbours. Councils issue event permits and may add conditions. People in nearby homes may see the beams, so tell them before the day, not after the first complaint.
Weather changes everything outdoors. Wind can move projector mounts and temporary structures. Rain scatters beams and leaves reflective puddles on the ground. Cold and damp can fog the optics. Check the mounts and masks after any big gust. Decide before the show what makes you stop, such as a wind speed or a storm, and who has the authority to call it. In bright light you may not see a stray beam, so rely on knowing where every beam should be. [cl. 7.2.2]
Crowds are harder to manage outdoors. Fences can be climbed, and people wander after dark when barriers are hard to see. Brief security on why the beam area matters, and agree how they will alert the operator. If anyone enters a restricted area, stop the lasers first, then let security deal with the person. Ask spectators to leave reflective balloons, flags and selfie sticks at home. At a large show people may bring binoculars or long lenses. Ban them if you can. If you cannot, multiply the spectator limit by 0.02. [cl. 5.2, 7.3.11]
Finally, write it all down. Put the aviation, maritime and council answers in your Display Safety Record, along with your weather limits and your spotters' positions. Walk the site before the show for new hazards such as vehicles, scaffolding and reflective items. Then rehearse the emergency steps with the whole crew.
Want to learn more? The LSO Certification course covers this topic in depth with interactive exercises, quizzes, and a final exam. Module 1 is free to preview.