Fog and Haze
Choosing haze or fog, placing the machine, and dealing with smoke detectors and the venue.
Laser beams are invisible in clean air. People see them only because tiny droplets in the air scatter some of the light towards their eyes. So the haze matters as much as the programming. It also matters for safety, which is the part people forget. Haze makes a beam visible. It does not make it weaker. A beam over the limit is just as hazardous in haze as in clean air. [cl. 4.4]
Haze and fog are different. A haze machine makes a fine mist that hangs in the air for a long time. It shows the beams without hiding the stage. A fog machine makes a thick, dense cloud that clears fairly quickly. Fog hides the stage and makes beam effects muddy. For laser shows you almost always want haze.
Check the fluid and what the venue allows. Water-based fluid is the most common. It is cheap and leaves little residue, but it fades faster. Oil-based haze hangs longer and gives finer beams, but it leaves a film on surfaces, and some venues ban it. If you are not sure, ask first. A film also builds up on the projector window over time, so check it and clean it as the maker says.
Place the machine so the haze drifts across the beam area, not straight onto the projector. Run it for 15 to 20 minutes before the doors open to build an even base, then use a low, steady output. A small fan can fix dead spots. Air conditioning is the enemy of haze. It strips the room faster than you can fill it and leaves pockets where beams appear and disappear. Ask the venue to reduce the airflow if it can. Carry a spare machine, because a dead hazer in the middle of a show leaves nothing to see.
Smoke and heat detectors are the biggest practical risk. Many will react to haze, which means a false alarm, an evacuation and perhaps a fire brigade call-out. Talk to the venue and its fire contractor well before the day. Any isolation of detectors is done by the venue or its fire contractor, with the fire warden aware and another way of watching for fire while the detectors are off. Never cover or disable a detector yourself. Keep the agreement in writing with your show records.
Tell people what to expect. Announce at the doors that the show uses lasers and haze, as you would for strobes and smoke. Some people with asthma will want to know. Fluid can make floors slippery, especially on stage, so tell the performers and wipe up spills. Visible beams make people want to reach up and touch them, so keep the barrier in place and the e-stop under the operator's hand. The sample record in the DSR guide shows exactly that happening.
Want to learn more? The LSO Certification course covers this topic in depth with interactive exercises, quizzes, and a final exam. Module 1 is free to preview.